Sliding Door Roller Specifications:
| Sliding Gate Wheel with Exterior Bracket (Single Bearing,Y Groove) | ||
| NO. | Diameter | Weihgt |
| HT1Y50 | 50mm | 261g |
HT1Y60
|
58mm
|
390g
|
HT1Y70
|
68mm
|
628g
|
HT1Y80
|
78mm
|
790g
|
HT1Y90
|
88mm
|
1100g
|
HT1Y100
|
98mm
|
1360g
|
When installing new sliding door rollers, be sure to adjust them all the way upward before you replace the door in its track. By doing this, the new rollers will not interfere with your movements when you install the door back in place. Adjust the rollers back down until the door locks and is sliding easily. Be sure that there is an equal gap on the bottom and top parts of the sliding door when it is around 1 inch from the side jam. If the gaps are not equal, you can adjust the rollers.
Resource：http://www.jinnaike.com/product/sliding-door-roller.html
没有评论:
发表评论